It is used for the transportation of containers in which products are transported in export and import.
It is manufactured in 20'30'40' 45 FEET container sizes. Reinforced “I” section main chassis are welded with 120/12 mm upper and 120/12 mm lower and upper lamellae and 5 mm core sheet with automatic submerged arc welding machine. These frames are supported against torsion by connecting to each other with cross members.
1x40', - 1x30' in the middle, - 2x20' sized containers can be transported. There are 12 locks.
3 axles with a capacity of 12 tons are used. There are brake pads and heavy duty brake levers in accordance with TSE norms.
It is completely made of Ereğli Iron and Steel and has St37 and St52 quality.
TOP STRUCTURE: Manufactured in 20'30'40' 45 FEET Container dimensions. Reinforced “I” section main chassis are welded with 120/12 mm upper and 120/12 mm lower and upper lamellae and 5 mm core sheet with automatic submerged arc welding machine. These frames are supported against torsion by connecting to each other with cross members.
TRANSPORTABLE CONTAINER SIZES: 1x40', - 1x30' center, - 2x20'
CONTAINER LOCK: 12 locks
AXLE: 3 axles with a capacity of 12 tons are used. - There are brake pads and heavy duty brake levers in accordance with TSE norms.
SHEET METAL USED : It is completely made of Ereğli Iron and Steel and has St37 and St52 quality.
PAINT: After all surfaces are completely deburred and cleaned with chemical liquids, two coats of paint are applied on epoxy primer.
CHASSIS: The chassis is made of high-strength steel with “I” cross-section and the strength is ensured by automatic gas metal arc welding machines, taking into account the difficult terrain conditions and overload.
AIR SUSPENSION: Parabolic double deck Z scissors and shock absorbers
FRONT AXLE LIFT: Front axle lifting and lowering system located inside the cabin.
TIRES: 6+1 tubeless tires with 385/65 R22.5 size.
FOOT: Double speed mechanical legs, each with a carrying capacity of 24 tons.
BRAKE: The brake components used are in EU Standards and designed from WABC0 brand products.
AIR HARDWARE: The air required for air suspension, front axle lift, brake circuit and ABS circuit is used from the air tank. The hoses used in this installation are polyamide and resistant to air pressure.
KING-PIN 2" SAE/DIN norms KingPin made of high strength forged steel.
STANDARD ACCESSORIES: 1- Single spare wheel place 2-1 tool cabinet 3- 1 bicycle railing 4- 1 chock and chock place 5-CRNi 1 coated 30 liter water tank
OPTIONS: 1- Rear axle lift 2- Fire extinguisher cabinet 3- Double spare wheel space 4- Separate fender for each tire 5- Lifting bumper 6- Front axle lift brake system
