Dumpers are widely used especially in the construction and building sector. They are preferred because the body part is suitable for transporting sand, heavy construction materials, etc.
Pool Type Dumpers are preferred for transporting materials such as sand, gravel and asphalt. Width 2550 mm, length 6700 mm - 8000 mm.
Feet; Double speed 25 tons moving and 50 tons stationary load capacity feet are used.
Base frame is made of 160 NPU and double closure is made. Base gratings are mounted with automatic gas metal arc welding machines using 8O NPI in dense or sparse form depending on demand.
The base sheet is 4-5 mm thick and if desired, the resistance time can be increased with Hardo./400 steel sheet.
DIMENSIONS: Chassis Length; It is made in different sizes depending on the chassis length and request. Width 2550 mm, length 6700 mm - 8000 mm.
PNEUMATIC SYSTEM: In the pneumatic installation of the trailer, the air supply time, which causes loss of time and fuel before the road, has been minimized by using the records that will prevent energy leaks and polyemide hose that is not affected by climatic conditions.
FEET: Double speed 25 tons moving and 50 tons stationary load capacity legs are used.
DUMPER BASE FRAME: It is made of 160 NPU and double closure. Base gratings are mounted with automatic gas metal arc welding machines using 8O NPI in dense or sparse form depending on demand. The base sheet is 4-5 mm thick and if desired, the resistance time can be increased with Hardo./400 steel sheet.
REAR AXIS SHAFT: 0100 mm and St 60 quality and bushings are bronze plated.
TELESCOPIC CYLINDER AND HYDRAULIC COMPONENTS: Specifications and number of telescopic hydraulic lifts: It is determined in the most appropriate way based on the length and working conditions of the tipper. Heavy duty brand cylinder of our own production is installed. Dumper Pneumatic Controlled, double speed lowering valve. Damper gearbox and pump are coupled type with limit control safety valve. Air and hydraulic hoses and fittings used comply with EU standards.
SHEET METAL USED : It is completely made of Ereğli Iron and Steel and has St37 and St52 quality.
PAINT: After all surfaces are completely deburred and cleaned with chemical liquids, two coats of paint are applied on epoxy primer.
CHASSIS: The chassis is made of high-strength steel with “I” cross-section and the strength is ensured by automatic gas metal arc welding machines, taking into account the difficult terrain conditions and overload.
AIR SUSPENSION: In the air suspension system designed by prioritizing traveling comfort and safety; Trailer arm for manual height adjustment, level valve for automatic height adjustment, shock absorbers to take trailer oscillation amplitudes and parabolic Z scissors are used in the opposite sides of the air bellows.
FRONT AXLE LIFT: In the front axle lift system, which can be controlled from the tractor with a folded bellows from the axle holders, the WABCO brand axle lift valve, which includes all of these, is used instead of the 3-2 valves and separate electric coil used in the past.
TIRE: 6+1 tubeless tires with 385/65 R22.5 size.
BRAKE: The brake components used are in EU Standards and designed from WABC0 brand products.
AIR HARDWARE: The air required for air suspension, front axle lift, brake circuit and ABS circuit is used from the air tank. The hoses used in this installation are polyamide and resistant to air pressure.
KING-PIN 2" SAE/DIN norms KingPin made of high strength forged steel.
STANDARD ACCESSORIES: 1- Single spare wheel place 2-1 tool cabinet 3- 1 bicycle railing 4- 1 chock and chock place 5-CRNi 1 coated 30 liter water tank
OPTIONS: 1- Rear axle lift 2- Fire extinguisher cabinet 3- Double spare wheel space 4- Separate fender for each tire 5- Lifting bumper 6- Front axle lift brake system
